I have a customer with a 3 month old Quattro 8000 and manual genset start. It was the first one I’ve ever installed
I have not been to site yet as it’s quite remote and quite a drive but thought id get some ideas before I go as there is no phone range on site
Customer has said that when genset is plugged in and turned on, the Quattro seems to not take the input and switches between charge and inverting every few minutes.
I have set the generator input current to 20A because of his existing cabling in the house which he wanted to leave but his genset is a Kabota 6kVa
Otherwise it operates normally without genset
I’m sure it’s something I don’t have set right in config but could I please get some ideas on what to change and look for.
Thanks