question

hglab avatar image
hglab asked

Inject AC loads data to VenusOS/Node-RED

I have a super simple island installation with

  1. SmartSolar Charger MPPT 100/50 and Battery
  2. Venus OS and Node-RED connected with SmartSolar Charger
  3. Inverter (not Victron)
  4. Shelly Device measuring Power/Energy after Inverter

Information from SmartSolar are working fine. AC loads information from Shelly is also available in Node-RED.

I am wondering if there is any chance to "inject" the AC loads data from Shelly into the Victron environment, so that the AC loads are shown in the Victron environment/dashboard?

p.s. upload of an image did not work :-(

https://i.ibb.co/Mc7FR2W/Victron.jpg

Node-RED
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers