I have a victron 24/3000 multuplus inverter/charger, 2, mppt 250/60 charge controllers, and a battery victron smart monitor, 8 12v 155ah agm batteries paralle/series for 24v. My problem is as follows...the battery monitor says the batteries are at 70% charged but the charge controllers are both in float and say they are charged. My absorption is set to 29v, my float to 27v as told by my distributor. Why are the charge controllers In float if the batteries are not 100% on the monitor?? I think the settings are backwards but it is what distributor told me to set them at