multiplus II, red node, how to manage charging power

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

marekpl asked Jul 30, '24

hello,

I would like to charge battery when have too much power from PV (PV is before Multiplus II), or when power is cheap (night).

I finally managed how to power my devices from battery, but now I can't control charging.

There is a block in red node for charger, but is not available:

this option is blocked someway in other place?

Multiplus-II Node-RED

1722370424792.png (30.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

141 People are following this question.

Answer 1 · 2024-07-30T21:11:12Z

nickdb answered · Jul 30 at 09:11 PM

Could you please post this on the new discourse forum, since modifications has now moved.

See the announcement here:

Thanks

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

marekpl commented · Jul 31 at 05:07 AM

Done, thank you. But on the new forum my account is at the beginning blocked :( let see when it is unblocked and my post will be visible

0 ·