Hi,
My setup is using 3p Multiplus-II + Ekrano. Grid, house hold, car charger as well as the old dumb AC-PV are all connected on AC-IN(s). Batteries and DC PV are on DC, of course. Nothing on AC-Out.
To minimize grid import I would like to put my VM-3P75CT right at the grid connection (the providers energy meter).
As the VM-3P75CT defaults to the "grid meter" role, it seems like there is nothing else to configure in VenusOS/Ekrano, right?
I was just wondering if there is anything else to configure the ESS or so to use this grid meter as a reference point. Maybe this is all automagic and I don't need to do anything else.
(I'm just prepping to do the setup, so didn't run into any issues yet, other than update firmwares... but that's all done and connection tests w/ the Ekrano were successful).
