This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Its not possible to change
DC input low shot-down to 37 V, and
DC input low restart to restart to 37,5 V.
Can i send the file to Victron to get this done?
Email, website?
Im using two Tesla battery modules Li-ion 6s 24V in series (48V) and the span for these are max 50V and min 30V if im correct.
Thanks for any help!
I don't think the 48 can go that low. There was recently a firmware update for the Multi that allowed lower settings, but I think that's too low:
https://www.victronenergy.com/blog/2019/07/17/ve-bus-firmware-460-veconfigure-and-venus-os-v2-33/
