question

himehran2000 avatar image
himehran2000 asked

Connecting Vectron Battery to BMS

I have 3, 330 Amp Vectron Battery, hooking them up in Parallel. Each connecting to Lynx power In directly. . On BMS 500, there are only BTV port for connecting the battery, I need one more, what are my options. Am I approaching this setup correctly?

Battery Bank is 990 Amp, The invertor Vectron 3k.

Lithium Batterylynx bms
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
pwfarnell avatar image
pwfarnell answered ·

You daisy chain the batteries in a circular loop.

screenshot-20240728-192541-kindlephoto-1584610212.png

media/pg/Lynx_Smart_BMS/en/installation.html


screenshot-20240728-192541-kindlephoto-1584610212.png (24.1 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

himehran2000 avatar image himehran2000 commented ·

Thank you, that makes sense.

0 Likes 0 ·

Related Resources

LED indications, warnings, alarm and error codes

Lynx Smart BMS product page

Lynx Smart BMS online manual

Additional resources still need to be added for this topic

Additional resources still need to be added for this topic

Battery Compatibility

Did You Know - How to create a battery profile for non-Victron batteries?