Hi!
We tried with multiple Agrofet isolators and we observed the following: Battery connected to one of the outputs, there is measurable voltage on the input and output2. Is this normal? what is the reason for this?
thanks
asked
AGROfet isolator not behaving correctly
@eliott, have you checked to see if there's any actual current (amperage) behind that voltage? A little "ghost" voltage between outputs is fairly common; basically just voltage bleed between contacts, but as long as there's no current behind it there's nothing to worry about. A relatively easy way to test that is to just apply a small load (12v computer fan is what I like to use) to the output while measuring the voltage; you should see the voltage quickly fall off to 0 without ever spinning up the fan.
