question

kaarthik avatar image
kaarthik asked

Can I disconnect one inverter in parallel operation mode, and have the other keep working?

good morning

if i connect two inverter in a parallel , if one fails both inverter shutdown is there any reason for both inverter turn off.is it possible to run if one fails other inverter alone run without reset the settings. thanks in advance.

MultiPlus Quattro Inverter Charger
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @kaarthik

This is not possible.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Willem avatar image
Willem answered ·

I have a client who needs a secure uninterupted feed .

he needs two inverters to be connected to the load but if the one fails the other should take over and support the load.


in other words the one inverter should be the backup to the other inverter.



Can this be done ?

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

derrick thomas avatar image derrick thomas commented ·
As stated previously, this is not possible. When inverters are paralleled, if any one inverter fails they all shut down. You can quickly and easily reconfigure the system to get back online, but it is not automatic.
0 Likes 0 ·