question

lyn1337 avatar image
lyn1337 asked

Bridge PV input?

The 450|100 RS MPPT states a

> Max. DC output charging power

of 5760W total, but only 4000W per tracker.

(src https://www.victronenergy.com/upload/documents/Datasheet-SmartSolar-MPPT-RS-EN-.pdf)

Would it not be feasible to bridge the tracker inputs when there is only one array of larger expected output power?

MPPT ControllersMPPT SmartSolarmppt rs
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

No. Do not attempt that.

If the array is too large, split it into two smaller arrays. Trackers do not need to be symmetrical and it is multi tracker for a reason.

The specs and configurations are clearly documented in the manual. Stick to that.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.