This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hey!
I'm trying to setup a 3 phase system and I have connected to it via ve bus through a mk3 dongle connected to my android phone.
The system is recognized and setup is triggered, but once I choose to setup 3 phases one of the units starts blinking, but I'm unable to select the phase. The app seems stuck. See the attached screenshot.
What an I doing wrong?
Thanks!
Joost
If I recall correctly (it's been a while) it's supposed to be a grab-and-drag scenario - you long-press from the lower "stack" of 3 units in that screenshot, and drag it up into the (greyed) phase layout, and again with the next in the stack, etc.
You only have 3 units, correct, one for each phase?
Hey Justin!
I tried dragging and dropping in all kinds of manners, but no l1,l2,l3 were ever present to drop onto. It is either broken or completely unintuitive to me...
I have now solved it by digging up an old Windows device and installing victronconnect in it. That worked like s charm.
Thanks!
