Good Day,
I have a simple outcome,
Use solar to power up loads and charge batteries when available and if the loads go higher than X W amount use the grid .
Now using VS options doesn't allow you to use Assistants.
With the below I achived the following :
If the loads are > 1500W for 2seconds the Grid kicks in.
If the loads are < 800W for 2mins the battery AND solar takes over.
The battery conditions work as stated below as well.
Now the issue is :
When the grid is NOT required the system is using nearly 50% from batteries and 50% from solar (+-) .
When the batteries reach < 50% the batteries are charged from the Grid rather than the Solar.
PS : My solar array produces about 1600W
How can I maximize the use of the solar ?