So we have a Multiplus 12 | 3000 | 120 - 16 | 230/240V on board and we would like to switch from AGM batteries to lithium (lifePo4) batteries.
If I look at the manual I read the following:
Battery type: The standard setting is the most suitable for Victron Gel Deep Discharge, Gel Exide A200, and tubular plate stationary batteries (OPzS). This setting can also be used for many other batteries: e.g. Victron AGM Deep Discharge and other AGM batteries, and many types of flat-plate open batteries. Four charging voltages can be set with DIP switches. With VEConfigure the charge algorithm can be adjusted to charge any battery type (Nickel Cadmium batteries, Lithium-ion batteries)
I only read Lithium-ion and not LifePo4, does that mean that our multiplus cannot handle lifePo4 batteries?