question

Allan Yates avatar image
Allan Yates asked

Additional relays for Skylla-IP44?

Is there any method to add more relays to a Skylla-IP44 charger? I have the onboard relay to trigger a fault LED in the case of a charger fault. However, I would like to have a relay drive a battery vent fan as well (fan on when charger charging). There are a couple of other ways I could accomplish this, but a relay off the charger would be the cleanest.



Thanks,

Allan.

RelaySkylla
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @Allan Yates

The unit only has one relay, so this is not possible.

the easiest solution: wire a fan fed by the AC input of the charger.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic