Hi,
I have a Cerbo Gx connected to my Easy solar 12v1600 inverter charger( to the mmppt charger to be exact) via VE direct. I will connect my Truma 230v electric element to my inverter via the boiler (relay) connection. I would like to customize the Cerbo to control the relay based on the SoC of the battery.
When the battery is above 90% the Cerbo would activate the relay starting the element and thus using the extra solar energy to warm the water rather than wasting it.
Can anyone confirm to me that the Vedirect connection will allow to program the Cerbo and achieve this result? Or can I do that some how?
Thanks a lot