Hello,
Is there a way to connect a bluetooth dongle to the CCGX, thus enabling the following of the CCGX from an Android phone (accurate amps and volts in real time, etc.).
Thank you.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello,
Is there a way to connect a bluetooth dongle to the CCGX, thus enabling the following of the CCGX from an Android phone (accurate amps and volts in real time, etc.).
Thank you.
No, a Bluetooth connection to the CCGX is not currently supported.
But the CCGX is available in VictronConnect when it is connected to the same local network with a wifi adapter, or through the Ethernet port.
11 People are following this question.
Batteries apparently losing charge on light load
Bluetooth locking up at 20% on load MPPT
Quattro based SOC % counts down too slowly but CCGX displays correct AC load wattage
SMA STPTL-30 + data manager M + Victron Quattro = ESS + zero feed-in
Victron Connect unable to find my mppt 100/50 solar controller