Hello, I’ve had problems with my setup for the last week as displayed here. I’ve used the Victron Toolkit to figure out the LED disk play, but there’s no info for the current LEDs displayed on the MultiPlus
Any help would be appreciated.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello, I’ve had problems with my setup for the last week as displayed here. I’ve used the Victron Toolkit to figure out the LED disk play, but there’s no info for the current LEDs displayed on the MultiPlus
Any help would be appreciated.
This is a normal situation. There are many possible LED light variations in an ESS configuration that aren't all completely documented.
I will add these as time goes on, for now I was able to reproduce the code you describe as ESS in Optimised with BatteryLife enabled, in the absorption stage of the charge cycle. Not exporting or importing, and charging from the DC MPPT.
It’s interesting that you mention charging from DC, as I have no DC charging equipment.
Would you be able to assist me with the issue I’m having of no critical loads being displayed? I mentioned it in the thread linked from my post.
Thanks again!
In this configuration the MultiPlus doesn't know if the DC MPPT is charging or not. It does know when there is a surplus for export though.
Additional resources still need to be added for this topic
118 People are following this question.