question

Gabriel Tanasescu avatar image
Gabriel Tanasescu asked

Victron Quattro 40/8000 :Aux K Relay's used for diverted of surplus power in Off-grid Pv inverter suport system

I have the attached diverted made by me, this is connected to the water heater 2000W.Is is connected to programabile K1 relay.

The settings is below

The settings of the Charger is below

Question:Is possible to use programabile K1 relay following the battery charging curent ? (in my case is 50 Amp =apox-2400W)

???????




Relay
1569485968696.png (44.5 KiB)
20190327-161435.jpg (887.6 KiB)
1569486349218.png (13.3 KiB)
1569486377788.png (13.3 KiB)
1569486431393.png (37.9 KiB)
1569496743795.png (15.9 KiB)
1569496762740.png (7.9 KiB)
1569496779321.png (12.4 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
CristiMV avatar image
CristiMV answered ·
Hi Gabriel Have you tried in the end this? Is it working as expected? Thanks
2 comments
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Gabriel Tanasescu avatar image Gabriel Tanasescu commented ·
Yes is working well .No more problem, but the best way is to use the USSR controlled by one Ct sensor by Arduino Nano.
0 Likes 0 ·
harold avatar image harold Gabriel Tanasescu commented ·

Hi
Why do you use V as a level setting and not SOC%?

Harold

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic