This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
There seems to be an issue with updating the various parameters (specifically SoC) within the VRM side of Victron Connect. I can get to the Lynx Shunt via Cerbo GX and through VC/VRM but neither side is working entirely. The Cerbo GX side won't let me update SoC and the VRM side will not fully populate the device settings, under the gear icon.
Anyone else having this issue? Really too bad that full functionality isn't enabled locally (travelling on a boat with intermittent internet).
could be a server outage on Victron's side? but why only some data coming through...very, very slowly.
Other things to check?
Update: gear still takes minutes to show up as icon (replaced cloud spinner). After that it is still arbitrary whether full settings data shows up or not. Also noticed that the Relay tab shows up arbitrarily as well.
can anyone duplicate this error? Seems strange we have to use internet/cloud to be able to set all Lynx Shunt parameters. should all be local!
