This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello all,
I put all the bits I have in a drawing but not I need to figure out the wiring. I know some of this can use V.E. Direct and some V.E. Bus but still not sure what connects to what and more importantly the proper wire gauge.
All thoughts are welcome
Hi. Take a look to see how Victron wired their demo van. Follow the links for schematics, etc., and cut out the pieces you don't need: https://www.victronenergy.com/blog/2019/06/18/the-victron-van-install/
Also, this is great: https://www.victronenergy.com/blog/2019/09/03/wiring-unlimited/
The relevant manuals for each piece of kit will help too. All available on the Victron website.
If you're diy'ing this, then fine. We don't mind hand-feeding to a degree, but you're expected to do the tasting and chewing yourself.. :)
The VE.Bus isn't relevant to you if you don't have an inverter. And you may also like to look at the bluetooth equipped kit too. Sure there's an issue selecting from a massive product range, but we love it that way, don't we?
