Hey Guys,
I have my Victron IP65 12/4 charger connected to my new car's battery (direct to the new battery). But it is not showing any LED Status Lights while charging. At power on the charger LED's indicate TEST then after a short period it indicates BULK for a minute or so, then the charge status LED's go out. The Blue 14.4v/normal Mode LED is the only light left on.
I've checked the charge status on the Victron app on my mobile and it says that the battery is charging and in the BULK mode, but no lights on the charger itself.
Why aren't the LED status indicator lights on?
Can I reset the charger to rectify this?
This new battery has been on charge for 58 minutes now in BULK mode at 13.32V 4.0A - is this normal for a new fully charged battery?
I want to leave the car on charge while I'm away for approximately 4 weeks and want to make sure everything is working correctly and most importantly SAFE.
Thanks in advance for your insights/help ; )
Cheers Steve
