question

mfred68 avatar image
mfred68 asked

Enphase system still not producing in ess mode

I have my 4kw enphase microinverter system connected parallel to my loads on AC out1 of the multiplus, and the grid to AC in, and have set up ess for self consumption, no dc export, and surplus ac export allowed when battery is full.

I have set the frequencies and uk code correctly too, but my enphase system is not producing power. If I bypass the inverter with the bypass switch and am back on pure grid power the enphase system starts to work again.

Any suggestions?

ESSAC PV Couplingenphase
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mfred68 avatar image
mfred68 answered ·

Panic over, it's now working perfectly, I don't think it was light enough when I panicked this morning lol.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.