question

maitresyoda avatar image
maitresyoda asked

How can I share 3 x AC coupled Victron systems in a microgrid?

Hello,

I have 3 installations in my home in AC coupling. The grid is here only when the SOC is under 50% controled by CCGX.

When i don't go to the Works in week end, the batteries are Full and the Labo are Full too and i need energy for my Home and sometimes the Soc is under 50 %, i don't want to take the Grid.

When i go to Works or Labo in the week, my Home is Full and i need energy for Works or Labo. I always disconnect from grid when the SOC is upper than 60%.

How can i share this Full batteries beetwen Home Works and Labo ?

How can i install and configure to make a MicroGrid ?

Where i can connect the 4kWc ?

Thanks

AC PV Coupling
victron-home.jpg (1.9 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

All you can do is to connect all 4 inverters in Parallel and all the batteries as well. and solar

and make one micro grid system

It will all depend on how far they are away from each other.


if all 3 run off the same feed in line then put the micro grid there and feed all 3 sites from that connection.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.