question

bengt avatar image
bengt asked

How to configure start and stop of a generator on a Easy Solar 48/3000

Which function and what values are suitable?

GeneratorEasySolar All-in-One
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

The EasySolar contains a CCGX and a Multiplus. So either could be used to configure the automatic starting and stopping of a generator (with its own 2-wire receptive autostart controller).


This Automatic Generator start/stop manual covers the details.

Let me know if the manual is not clear in any parts, I am working to improve it.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bankey-bihari-dassa avatar image bankey-bihari-dassa commented ·

I just encounterd the setup of a smartgen controller with an easy solar 24/3000.

I found the relay at multiplus board switched off. then I found the relay at the back of the ccgx. this is the relay the easy solar seems to use by default.

This post helped me a lot with the smartgen controller settings to switch it to xx10 version (autostart) https://community.victronenergy.com/questions/89269/smartgen-generator-controller.html

tnx for the hints.

0 Likes 0 ·