Is it possible to integrate a Skylla-i charger (with the Skylla charger control panel) into my network that includes, MultiPlus II, Cerbo GX, REC-BMS, and WakeSpeed WS500 devices?
Can I plug the Skylla into the daisy chain of the MultiPlus-II VE.Bus ports OR directly into one of the ports on the Cerbo GX?
Background: My boat is an Oyster with a 230v 50Hz electrical system. I've added a Skylla-i charger to my boat electrical system to be able to charge my batteries from shore power when docked in the U.S. with 60Hz power. I am using a 3 X MultiPlus-II 230V 24/5000/120-50 in parallel, connected to a Cerbo GX network, that includes a WakeSpeed WS500, and a 9M REC-BMS. All of the equipment described above is currently working well together. The Skylla has a Can bus connection.
I do not think this table is complete or even correct, but am getting lost in the different protocol names and capabilities. I am new at this... :-)