System Critical Loads shows only L1 on VRM->Advanced view

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

dcsonka asked Jun 10, '24

Hello Experts,

I have a 3-phase system with 3x MP2 48/3K/35-32 and when I enable the Gateway->System-Critical Loads, I see only the L1 phase related data.

How can I select the L2 as well as L3 related data too?

Thanks

Dezso

vrm advanced

1718032547477.png (21.8 KiB)

1718032812879.png (22.1 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2024-06-10T19:16:57Z

Duivert NL answered · Jun 10 at 07:16 PM

Hi just checked mine does that too, you could use ve bus ac output power instead

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2024-06-20T21:04:26Z

dcsonka answered · Jun 20 at 09:04 PM

Hi, I agree, I guess, this is a bug, however, just for this i am not going to make an upgrade (dont try to fix something that is not broken)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.