victron lithium battery

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

This question was closed Jun 10 at 11:05 AM by tabet for the following reason: Too subjective and argumentative

question

tabet asked Jun 10, '24

hello guys can i connect my Victron lithium batteries directly to the Cerbo gx as a can bms without Lynx smart bms?

screenshot-2024-06-10-105721.png (218.5 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

109 People are following this question.

Answer 1 · 2024-06-10T08:11:31Z

nickdb answered · Jun 10 at 08:11 AM

Please read the manuals and specs before asking questions that are answered there:

For the lithium battery smart:

Requires one of these BMS-es:

VE. Bus BMS / VE.Bus BMS V2 – recommended for systems with our inverter/chargers.
smallBMS – recommended for use in small systems.
Smart BMS 12/200 - recommended for use in Automotive and Marine systems having DC-loads and Alternators.
Smart BMS CL 12/100 – recommended for use in Automotive and Marine systems having DC-loads and Alternators.
Lynx Smart BMS - recommended for use in large systems.

For the superpack:

The SuperPack batteries are extremely easy to install, not needing any additional components.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.