Hi,
I have a SmartSolar connected to a 280AH LifeP04 with a BMS. How come I have a Float of 13.9V when I use the Lifepo4 preset which has 13.5 volt float? At this point in time the battery is full and there is no load.
regards,
Matt
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi,
I have a SmartSolar connected to a 280AH LifeP04 with a BMS. How come I have a Float of 13.9V when I use the Lifepo4 preset which has 13.5 volt float? At this point in time the battery is full and there is no load.
regards,
Matt
Additional resources still need to be added for this topic
55 People are following this question.