question

patxi-toller avatar image
patxi-toller asked

Orion XS: D+ signal and Engine Shutdown Detection

screenshot-2024-06-09-alle-161718.pngHi, I've installed an Orion XS with the D+ signal plugged on H pin, but I'm not sure if the Engine Shutdown Detection must be turned off. Reading the Manual, think it should be, but I'm still not sure.

Thank you for your reply.

orion dc-dcorion xsdc-dc charger
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
David Robinson avatar image
David Robinson answered ·

I’m assuming you are talking about D+ on a Sprinter Van. I have my XS set up the same way, and the Engine Shutdown detection needs to be OFF.

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

patxi-toller avatar image patxi-toller commented ·

Hi David, thank you for your reply. D+ on Citroen Jumper van 2021.

Actually reading back the manual, I think the set up falls into the Remote On/Off Connections case, where "the engine shutdown detection must be switched off".

By the way, in connecting D+ signal to pin H, I removed the bridge between L and H pins. Did you? Greeting from Italy

0 Likes 0 ·

Related Resources

Victron DC to DC Converters Product Range

__________

Additional resources still need to be added for this topic

Orion XS product page

Orion XS datasheet

Orion XS manual (html)

__________