question

pulith avatar image
pulith asked

Shunt 500A state of charge keeps going missing

I have a 500A shunt and using it original ve direct cable which is fixed to RI running venus os. The shunts state of charge when battery SOC is reducing sometimes the shunt stops showing the SOC. it doesn't always happen but some times. 1000018546.jpg

SmartShunt
1000018546.jpg (316.2 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

Usually that means it is in an un synchronized state.

Did it loose power at any point before it does this?


1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pulith avatar image pulith commented ·

No. Its running directly from the 48v system. The bms hasn't been cut off and the inverter never shutdown. Also when I check using bluetooth it's showing the SOC

0 Likes 0 ·