question

cc5084 avatar image
cc5084 asked

Cerbo GX Communication

I'm going to connect a bmv-712 smart, MPPT 100/30, muliplus 3000W inverter, and Orion XS to a cerbo GX. I am going to configure each component to be compatible with a lithium battery. Is there any additional programming or parameter changes that I will need to do with the cerbo GX in order for it to communicate with everything properly? Or, does it simple automatically communicate information when a component is plugged in?

cerbo gxMPPT SmartSolar
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

@cc5084

Usually it is straight communication plug and play. (If you get the ports right - watch the rj45 ones )

For your chosen components it will be anyway.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

cc5084 avatar image cc5084 commented ·
That is what I figured but I just wanted to get a second opinion to be sure.

To follow up on that question, do you know what all is being communicated exactly? I know roughly that it is basically the state of charge of the battery, and the current going in/out for charging/discharging. Is there anything more in depth to it or is it pretty simple like that.

0 Likes 0 ·