This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I will soon be ready to connect all the data cables between my battery bms (not Victron) and the inverter and the cerbox gx, I'm wondering if I can use standard ethernet cables, (like the ones you get sent with a router) To the Cerbo gx? Are the cables all wired the same fir bms can, ve can and ve bus?
If not, are there wiring diagrams anywhere to see?
There's one exception - the BMS connection. For this follow @Daza 's instructions.
Easy just to buy one but if you want to link is here https://www.victronenergy.com/live/battery_compatibility:can-bus_bms-cable#introduction
