question

h2009 avatar image
h2009 asked

3 phase MP2 AC and DC solar frequency “stuck”

Hi there

My system running latest firmware

3x MP2 10kva

DC solar

Solis 3 phase G5 AC solar.

76kwh batteries


So today I’ve noticed something strange, which my system is off-grid during the day to maximum solar usage with no grid bleed.

Batteries charged up to 100%, and frequency went upto limit to shutdown solar 53hz and the sun went down, frequency shifted down to 52.8-6hz dancing every few seconds (solis display showed static 52.69hz); however my batteries were being used and charge state dropped to 94% but the frequency was still being held to keep off the AC solar. DC solar was on but limited due to direction.


I had to connect to the grid to pull the frequency down to 50hz and get both AC and DC solar to work.


Any ideas why this happened?

Update: I'm getting really bad light brightness changes (COB integrated downlight) - both on grid and off grid. Never had this before.


screenshot-2024-05-27-at-194052.png

Multiplus-IIsolarfrequency
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources