I haven't been able to come up with definitive answer on the subject of fusing, I'm planning to install 3 x 240ah lithium batteries with a continuous max discharge of 250amps in parallel using victron 600amp busbars and 95mm2 cable for positive and negative cabling, cabling will be less than a meter long, should each battery positive before the busbar be individually fused? from the busbar there will be a 400amp T class fuse before the 3000w Multiplus, if the batteries should be individually fused as well what size and type of fuse would be recommended. The largest surge current draw will be no more than 140amps.
.