This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Just fitted 3 battery balancers to my 48v system.
Alarms shortly appeared on 2 of the balancers
1 with high voltage on upper battery
And
1 with high voltage on lower battery
Do I leave them, and they balance themselves out.
Or do I reset, and wait for it to happen again ????
The alarms are for info. Once the voltage is high enough, the balancers will kick in. And continue working. Might as well clear the alarms.
Balancing a big system can take a long time. So don't expect immediate results.
