This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have two 6V deep cycle lead acid (GC-2) batteries connected in series to give me my 12V for my camper. I have looked at the Victron MPPT 100/50 manual for the appropriate battery type switch position, but I am confused. What switch position should I use? I believe that it came pre-set at "2".
First thing is to check the battery maker's recommendations and match to the values listed in the Victron manual. If this fails use the Victron deep discharge 2.
