question

Henry Pearson avatar image
Henry Pearson asked

Rename L1 L2 and L3

This is a bit of a long shot but any way to be able to rename L1 L2 and L3?

I have the different phases for different circuits, would be great to be able to rename them as "Charger" "Calorifier" and "sockets".


1715882678915.png

Venus OS
1715882678915.png (114.3 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
semlohnhoj avatar image
semlohnhoj answered ·

I'll second that as well as having the different phases for different roles like "AC Load", "Generator" , "PV Inverter" & "Grid".

I use mine primarily for a single phase grid meter but I'd like to use the other two phases to specifically measure an instant hot water heater and a cooker.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron Venus OS Open Source intro page

Venus OS GitHub (please do not post to this)