I have troubles getting this combination to work: EasySolar 1600/24 + Victron Lifepo4 Smart + Smart BMS V2
I've upgraded 2 x 12v AGM batteries in my existing system to a single Lifepo5 Smart battery.
I have Smart BMS V2 to monitor the new battery.
The problem is that once I connect BMS's "Multiplus/Quattro" socket to EasySolar's VE Bus rj45 socket the inverter alarm signal turns on and the inverter does not work any more.
The BMS "Status" led illuminates for a second with blue light when it is connected to EasySolar but does not appear to stay illuminated.
Moreover, I've tried to get the BMS to be visible in Venus OS on a Raspberry PI but to no avail. I've also tried to connect Raspberry Pi to BMS's Remote Panel using lan cable but without success.
I wonder what my options are?
* Is BMS v2 compatible with EasySolar or have I been sold a wrong product?
* If BMS v2 is not compatible with SmartSolar what would be? BMS v1 smallBMS?