This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Now one step closer to realising my off grid project.
I have built a low tech and low cost modular mounting for my pv panels. Each panel is 450W 49v.
As it is modular, i can extend and add more panels to achieve the optimum configuration. Currently 7 panels - 3.1kW
I am now looking for advice on the best controller and inverter package and this model seems to fit the bill - Inverter RS Smart Solar 48/6000
Would be interested to hear thoughts on suitability.
Have one, love it.
Do your tanks under the panels have weight in them (sand/water). Solar panels are amazing wind catching devices...
@Alexandra the recycled IBC tanks were used in the design because they can be filled with water to ensure the panels don't fly away!
Do you know what the minimum battery spec that can be connected to Smart Solar 48/6000? I hope to keep the battery costs to a minimum.
I ask because the load will be connected during daylight hours and when the sun shines... all part of the project.
If you are using lithium....
A battery that can discharge 125A continuously at least. With peaks of 180/90A.
