Can't find the information online.
For the v507 and v508 there was something available, see below.
https://professional.victronenergy.com/news/detail/225/
I can't decide if it is worth to update or not without the changelog.
Thanks!
asked
What is the changelog of the V510 FW for the Quattros?
Unless the below text affects you, then no. And the reason why most cases firmware updates after initial install don't matter.
510
February 29, 2024
Added gridcodes: Czech, Poland
Split the combined G98/G99 gridcode in two separate gridcodes. With G98 being limited to 16A.
Enabled the appendix M. gridcodes of AS/NZS4777 for standard Multis/Quattros.
(installation requires external IP)
PowerAssist is now also available on the 500VA 230Vac products.
On the professional site under the firmware section is a changelog.doc with all the details.
