question

scott4534 avatar image
scott4534 asked

Settings for Yuasa L36-AGM

I have 2 x Yuasa L36-AGM batteries in my campervan. I'm planning on charging with 2 x 100W solar panels and a Victron SmartSolar MPPT 75V 15 amp controller.

First question - is this a suitable setup?

Then what would be the correct settings in the controller?

One thing I've read is that AGM batteries shouldn't use equalisation.

The battery details are:

screenshot-2024-05-06-103920.jpg

MPPT Controllers
screenshot-2024-05-06-103920.jpg (89.3 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
kevgermany avatar image
kevgermany answered ·

They recommend charging at 7A.

Assuming you have a 12V setup, the MPPT would be a good match.

As for settings, it's a lead calcium. Not sure, perhaps @Alexandra can help.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.