hello guys i have 6 quattro 15KVA each ac coupled with fronius tauro can someone help me how to stop feed in should i do it only in ESS or both fronius and ESS if someone can help me please
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
hello guys i have 6 quattro 15KVA each ac coupled with fronius tauro can someone help me how to stop feed in should i do it only in ESS or both fronius and ESS if someone can help me please
As far as i know the Tauro is not officially tested/supported.
https://community.victronenergy.com/questions/127234/comms-with-a-tauro.html
You will probably have to use and external control (not ESS) to do so. Although some say they have it working.
This is not a question for this forum however, refer to your local or closest dealership. You will be in need of more serious support, this is not a toy system.
AC-coupling and the Factor 1.0 rule
Additional resources still need to be added for this topic
MultiPlus Product page / Quattro Product page
MultiPlus 230V Manual / Quattro 230V Manual
MultiPlus 230V Datasheet / Quattro 230V Datasheet
VE.Bus Error codes / VE.Bus configuration guide
AC-coupled PV with Fronius PV Inverters live docs
Fronius Webinar: Fronius & Victron Energy: Easy system set-up
Fronius Advanced Webinar: AC Coupling with Fronius & Victron (AFR)
Fronius Webinar: Smart rural electrification with Fronius and Victron Energy
82 People are following this question.