question

bkarr avatar image
bkarr asked

How to Disassemble 100/15 MPPT to fix VE.direct port?

The wimpy surface mount ve.direct plug broke off the PCB of one of my 100/15 MPPT's. Very fragile design when just a couple of copper pads peel up and it comes loose. Should have at least put some plated through holes to anchor it better. Anyway, I need to know how to get the PCB out of the blue plastic shell so I can repair the connector? how is it attached? Glue? any hints on how to remove it from the blue plastic box?

MPPT ControllersVE.Direct
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @bkarr,

This is not possible to do, the part is not designed to be disassembled for circuit board repair.

Please click here and fill out this form for a remedy.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.