Hi everybody ,
I have an Ekrano that is connected to my N2K network via Ve can and cable, now I noticed in a log (I was looking for something else) that the Ekrano makes a lot of address claims, sometimes as many as 400, does anyone know where this is? depends on? Firmware ? Both Victron and a Dutch dealer (topsystems / Stroomwinkel) do not know the answer :-(
Who knows? And also found the same thing and/or resolved it :-)
Thnx !!
0x42 (YDWG-02), 0x05 (MiniPlex), 0x01 (MiniPlex) and 0x00 (MiniPlex) every ~10 seconds.
This looks like:
Victron: *device 0x42* who your are?
Device 0x42: I am Yacht Devices YDWG-02 s/n 00604331
Victron: *device 0x00* who your are?
Device 0x00: I am ShipModul MiniPlex 3 s/n 3B001350
Victrcan see that Victron Ekrano GX sends ISO requests to the devices on: *device 0x01* who your are?
Device 0x01: I am ShipModul MiniPlex 3 s/n 3B001350
Victron: *device 0x05* who your are?
Device 0x05: I am ShipModul MiniPlex 3 s/n 3B001350
Victron: *device 0x42* who your are?!
Device 0x42: I am Yacht Devices YDWG-02 s/n 00604331
Victron: *device 0x00* who your are?!
Device 0x00: I am ShipModul MiniPlex 3 s/n 3B001350
Victron: *device 0x01* who your are?!
Device 0x01: I am ShipModul MiniPlex 3 s/n 3B001350
Victron: *device 0x05* who your are?!
Device 0x05: I am ShipModul MiniPlex 3 s/n 3B001350
[...]
And so on more than 40 times.
I am not sure if this is critical, but there's no point in that. Looks like
a bug in the Victron firmware