This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I accidentally de-synchronized the SOC on my smart shunt. The battery voltage was showing about 94% SOC before I messed with the settings. I’m guessing when I get to the “ Float mode” I can synchronize SOC to 100% or will the system resynchronize automatically ?
The SOC will resync when the battery voltage is above the "Charged Voltage" AND the battery current is below the "Tail Current" for longer than the "Charged Detection Time". You can see these three values in the settings. So next time the battery gets fully charged it will resync.
