question

ripper avatar image
ripper asked

SSD relay to switch remote on Phoenix series

I want to have the solar charger connect and disconnect the inverter due to voltage.


Can I use SSD relays to switch the remote channel of Phoenix inverters? My concern is leakage voltage as they are usually non potential free.

Alternatively, they seem to be using battery voltage across the little bridge.Do I need to connect the two ports via a relay or is it enough to provide a "high" signal from the load controller?

inverter current draw
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @ripper

It's best to use a relay connected to the load output, and use that to switch the remote connection of the inverter.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic