comment utiliser une sortie de charge avec un mppt 100/30

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

Philippe “philned” NEDELEC asked Apr 25, '24

je n'ai pas de sortie charge sur ce modele. je voudrais allumer une lampe lorsque la nuit tombe.

est ce que mon schéma est bon ?

MPPT Controllers

mppt-et-lampe.jpg (85.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

103 People are following this question.

Answer 1 · 2024-05-02T14:21:14Z

Thierry Cortassa (Victron Energy Staff) answered · May 02 at 02:21 PM

oui le principe est bon mais attention a ce qu'on alimente derrière, le solid switch n'est pas un relai de puissance !

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2024-05-13T12:46:43Z

Philippe “philned” NEDELEC answered · May 13 at 12:46 PM

le but est d'allumer une lampe led de 10w (feu de mouillage sur un voilier)

mon schéma est donc ok pour cela ?

merci

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2024-05-13T14:09:18Z

Thierry Cortassa (Victron Energy Staff) answered · May 13 at 02:09 PM

10W ca devrait suffir cf fiche technique:

1715609152261.png (72.0 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.