question

Jenna Briggs avatar image
Jenna Briggs asked

Off Grid Goat Barn

I am looking at making an off grid goat barn, and I am a solar newbie. I will probably be using two LiFePO4 12V 200Ah batteries wired in parallel, giving me 400AH, to power the system, but I'm a little fuzzy on what I'll need in between. I know I need a charge controller, battery charger, battery monitor, inverter, and batteries, but I'm not sure what would work for what I want. Below are my calculations on daily kWh hours, the highest Wattage loads, and the differences between kWh hours during the summer and winter, as well as the general layout for the lights and outlets. I'm thinking about 8 circuits in total.

all-barn-electrical-loads.png

Barn Electrical Layout

offgridsystem designHelp
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

Hi, The best place to discuss design is with your supplier, design is a complex topic with many options and variables, so we don't encourage it on the community.

You can also look on the victron site, there are many brochures with examples for different applications.

Here is one for off-grid: https://www.victronenergy.com/upload/documents/Booklet-Off-Grid-System-EN.pdf

The rest can be found here: https://www.victronenergy.com/support-and-downloads/brochures


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron Offgrid page

Additional resources still need to be added for this topic