I was happy to see the new "NS" model looking more modern, then disappointed when I realized it still has a Type 2 plug instead of a fixed cable. Most chargers on the market have fixed cables or options for them.
Suggestion - Provide an option/conversion for the NS version, so the plug in the middle is just a storage mount for the car end of the Type 2 cable, still wrapped around the case but with no plug-end, instead wired-in through the bottom of the device. In this configuration, AC would come in via the entry point at the back.
Question - Could an existing EV Charger NS be modified this way? I saw this video in which, if you look carefully, it seems this modification has already been done on the generation 1 charger. The NS version/generation 2 has a secondary casing inside, not so easy to modify.
The plug section does unscrew separately so could be replaced by a DIY 3D printed holder for the cable end. Options to route the charging cable outside appear to be either drilling a hole at the bottom of the inner casing, or less invasive to find a compatible double-row screw terminal block upgrade for where the AC input is attached.
