This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I currently have connected my SmartShunt to a fridge. Would Like to Check how much AH it consumes.
When I Open Victron connect, historic values are shown way too low. Recent values are correct.
Any Ideas what ist going in Here ?
Is the displayed consumed AH value still correct, or is it calculated based in the wrong historic Data.
The Chart Shows the problem. It was connected to the Same fridge, that Always consumes arround 65W
Thanks for any Ideas.
It would be interesting to see a shorter time period when it's too low. Day from 01:00 to 01:30.
I suspect that during the low period, the fridge is switching on for a shorter period, which will be averaged over the time intervals in the graph.
The shorter graph will still be averaged over the data collection intervals, but will likely show much larger loads than it appears above.
Here's a shorter time period for both.
You're right - 
Could be averaging
